-
Product available in Size 2.6mm, 3.2mm, 4.0mm, 5.0mm. B-14 is a welding electrode with an ilmenite type coating. This electrode has greatly improved workability, mechanical properties & crack resistibility, and economy of the traditional ilmenite type electrodes in the performance of the flat, vertical, and overhead position welding. Therefore it is widely used in the construction of ships, vehicles, buildings, and important structures. It is suitable for butt joint and fillet welding of thin and middle thick plate up to 20mm. Please click chat with us at the bottom right for more details and quotations.
-
Product available in Size 2.6mm, 3.2mm, 4.0mm, 5.0mm. Please click chat with us at the bottom right for more details and quotations.
-
Product available in Size 2.6mm, 3.2mm, 4.0mm, 5.0mm. LB-52 is the most popular electrode for 490MPa class tensile steel in ships, bridges, buildings, and pressure vessels. This electrode was adopted in the first nuclear reactor vessel of Japan. Its usability is good in all positions and it deposits weld metal of high quality. Workability
- In all positions the workability is good and both fluidity and removability of slag are fine.
- The arc is stable and the bead appearance is quite beatiful.
-
Product is available in Size 2.6mm, 3.2mm, 4.0mm, 5.0mm. Please click chat with us at the bottom right for more details and quotations. LB-52-18 is a low-hydrogen electrode with a high deposition rate for mild steel. L " stands for low hydrogen, while "B" symbolizes a slag-shielding covered electrode."52" refers to the typical tensile strength of the deposited metal. "1" shows that it can be used in all positions, while "8" is the designation for "iron powder, low hydrogen " as in the AWS E7018 specification. -Superior welding performance with either DC or AC. -Superior mechanical properties: constant tensile strength and high impact value. -Superior crack resistibility.
-
Product available in Size 2.6mm, 3.2mm, 4.0mm, 5.0mm. Applicable to use for all welding positions. Better impact values at temperature down to -60°C. Good CTOD properties at temperature down to - 30°C. Both AC and DC-EP can be used Please click chat with us at the bottom right for more details and quotations.
-
Product available in Size 2.6mm, 3.2mm, 4.0mm, 5.0mm. FAMILIARC LB-52U is the world's No 1 covered electrode for uranami welding. With LB-52U your welding will be easier and faster and you will have confidence in the quality of your welds in any kind of pipe welding of mild steel and 490 MPa high tensile steel. Please click chat with us at the bottom right for more details and quotations.
-
The product is available in Size 2.6mm, 3.2mm, 4.0mm, 5.0mm. Please click chat with us at the bottom right for more details and quotations. RB 26 is a high titania oxide type welding electrode for mild steel. Widely used for welding sheets of ships, rolling stocks, and automobiles. -Arc is stable and penetration is shallow. -Less Spatter -Slag detachability is good. -Both AC and DC can be used.
-
TG-S50 is classified as ER70S-G in AWS A5.18. It provides superior usability through the fluidity of molten metal and wetting of the bead surface, and it can be applied to not only the root-pass welding of pipe joints but also almost all joints as well as welding positions. It has been Kobe Steel’s most highly reputed GTAW rod and has been adopted in a wide range of applications.
-
KOBELCO TGS-308L only available in size 1.6mm , 2.0mm and 2.4mm KOBELCO TGS-309L only available in size 2.4mm KOBELCO TGS-316L only available in size 1.6mm and 2.4mm Please click chat with us at the bottom right for more details and quotations.
