Description

Model SH45M
Voltage (Single Phase) 220 – 240V AC
50 / 60 HZ
Motor Rated Power Consumption 1850W
Motor Rated Ampere 7.5A
No-load Speed 650 – 720 rpm
Tool Adaptor Inner Diameter 19.05mm
Adjustable In Height For Max. Stroke 100mm
Coolant Supply Via Tool Holder
Magnet Power Consumption 38W
Magnet Adhesion 7350 N / 750 kgf
Magnet Dimensions 188mm x 86mm x 56mm
Weight 15kg
HOLE-CUTTING CAPACITY
Annular Cutter Out Diameter Plate Thickness
18-45mm (Standard) 9-50mm (Standard)
Drill Chuck & Twist Dri Max. Outer Diameter 13mm
Special Adaptor & Twist Drill 6-12mm
STANDARD ACCESSORIES 1. Pilot Pin 8.0 x 91mm : 1pc
2. Double Open End Wrench : 1pc
3. Hex. Key Wrench 2.5mm: 1pc 4.0mm: 1pc 6.0mm: 1pc
4. Operating Handle : 3pcs
5. Lifting Handle : 1pc
6. Fuse Block : 1pc
7. Fixed Screw : 1pc
8. Operation Manual : 1copy
Special Adaptor & Twist Drill 1. Adaptor Arbor Of Drill Chuck
2. Drill Chuck
3. Annular Cutter (one touch or Weldon shank) 18mm-45mm (for 35mm or 50mm thickness)
4. Twist Drill (Max. 13mm)
5. Miyanach X-1 Cutting Oil : 2L / per can
6. Special Adaptor & Twist Drill 6-12mm
7. Safety Chain