-
What's included -Fall Arrest Complete Set with Lanyard and double snap big hook -Carabiner
-
Selling pack RM 280.00 / Dozen (12 pieces)
- Thicker leather compare to red leather glove
-
10 1/2” FURNITURE SEMI LEATHER HAND GLOVE
-
10 1/2” BLUE JEAN SEMI LEATHER HAND GLOVE RM80/ DOZEN (12 PIECES)
-
-
AWS A5.18 : ER70S-6 JIS Z3312 : YGW12 EN ISO 14341-A : G 42 3 C G4Si1 Wire Weight : 15kg/ 5kg CHIYODA ER70S-6 CO2 MIG WIRE is a copper coated, low carbon steel GMAW wire, exceptionally planned for ideal execution under welding grade CO2 and higher CO2 blended gases. The superb copper covering of CHIYODA ER70S-6 CO2 MIG WIRE guarantees smooth and stable bolstering, great electrical contact and low tip wear. CHIYODA ER70S-6 CO2 MIG WIRE is appropriate for a wide scope of welding applications on gentle and medium quality steels. It is perfect for positional, single pass welding of sheet steel and steel pipes/tubes where the high silicon substance improve smoothness even weld beads with phenomenal wedge wetting and form.
-
AWS A5.20 : E71T-1C JIS Z3313 : T 49J 2 T1-1C EN ISO 17632-A : T42 0 P C1 H10 Size : 1.0mm, 1.2mm & 1.6mm CHIYODA E71-T FLUX CORE WIRE is a flux-cored rutile wire intended to be utilized with 100% CO₂ gas and has additional low hydrogen levels (H5) to give an astoundingly smooth and stable circular arc with a quick solidifying slag framework. It tends to be utilized on every positional weld with both single and numerous pass welds on gentle and low alloy steels. Suitable for applications incorporate machinery, capacity vessels, structural fabrication, funneling and so forth.
-
KOBELCO TGS-308L only available in size 1.6mm , 2.0mm and 2.4mm KOBELCO TGS-309L only available in size 2.4mm KOBELCO TGS-316L only available in size 1.6mm and 2.4mm Please click chat with us at the bottom right for more details and quotations.
-
TG-S50 is classified as ER70S-G in AWS A5.18. It provides superior usability through the fluidity of molten metal and wetting of the bead surface, and it can be applied to not only the root-pass welding of pipe joints but also almost all joints as well as welding positions. It has been Kobe Steel’s most highly reputed GTAW rod and has been adopted in a wide range of applications.
-
The product is available in Size 2.6mm, 3.2mm, 4.0mm, 5.0mm. Please click chat with us at the bottom right for more details and quotations. RB 26 is a high titania oxide type welding electrode for mild steel. Widely used for welding sheets of ships, rolling stocks, and automobiles. -Arc is stable and penetration is shallow.-Less Spatter -Slag detachability is good. -Both AC and DC can be used.
-
Product available in Size 2.6mm, 3.2mm, 4.0mm, 5.0mm. FAMILIARC LB-52U is the world's No 1 covered electrode for uranami welding. With LB-52U your welding will be easier and faster and you will have confidence in the quality of your welds in any kind of pipe welding of mild steel and 490 MPa high tensile steel. Please click chat with us at the bottom right for more details and quotations.
-
Product available in Size 2.6mm, 3.2mm, 4.0mm, 5.0mm. Applicable to use for all welding positions. Better impact values at temperature down to -60°C. Good CTOD properties at temperature down to - 30°C. Both AC and DC-EP can be used Please click chat with us at the bottom right for more details and quotations.
-
Product is available in Size 2.6mm, 3.2mm, 4.0mm, 5.0mm. Please click chat with us at the bottom right for more details and quotations. LB-52-18 is a low-hydrogen electrode with a high deposition rate for mild steel. L " stands for low hydrogen, while "B" symbolizes a slag-shielding covered electrode."52" refers to the typical tensile strength of the deposited metal. "1" shows that it can be used in all positions, while "8" is the designation for "iron powder, low hydrogen " as in the AWS E7018 specification. -Superior welding performance with either DC or AC. -Superior mechanical properties: constant tensile strength and high impact value. -Superior crack resistibility.
-
Product available in Size 2.6mm, 3.2mm, 4.0mm, 5.0mm. LB-52 is the most popular electrode for 490MPa class tensile steel in ships, bridges, buildings, and pressure vessels. This electrode was adopted in the first nuclear reactor vessel of Japan. Its usability is good in all positions and it deposits weld metal of high quality. Workability
- In all positions the workability is good and both fluidity and removability of slag are fine.
- The arc is stable and the bead appearance is quite beatiful.
-
Product available in Size 2.6mm, 3.2mm, 4.0mm, 5.0mm. Please click chat with us at the bottom right for more details and quotations.